INTEL l Solid-State Drive D3-S4510 Series - SSD - encrypted - 240 GB - internal - M.2 2280 - SATA 6Gb/s - 256-bit AES
Frontpage
Storage
SSD
INTEL l Solid-State Drive D3-S4510 Series - SSD - encrypted - 240 GB - internal - M.2 2280 - SATA 6Gb/s - 256-bit AES
You have to log in to shop/see prices.
|
|
INTEL l Solid-State Drive D3-S4510 Series - SSD - encrypted - 240 GB - internal - M.2 2280 - SATA 6Gb/s - 256-bit AES
-
Read Speed
555MB/s
-
Write Speed
275MB/s
-
Interface
Serial ATA III
-
Form Factor
M.2
-
SSD Capacity
240GB
|
Description
Specifications
D3-S4510 Series (240GB, M.2 80mm SATA 6Gb/s, 3D2, TLC)
SSDSCKKB240G801
Standard-endurance SATA drives available in capacities up to 7.68TB, designed to increase server efficiency and boost IOPS/TB performance over legacy hard disk drives (HDDs).
Specifications:
General
- Capacity 240 GB
- Form Factor M.2 22 x 80mm
- Interface SATA 3.0 6Gb/s
- Weight -
- Lithography Type 64-Layer TLC 3D NAND
- Use Conditions Server/Enterprise
Performance
- Sequential Bandwidth - 100% Read (up to) 555 MB/s
- Sequential Bandwidth - 100% Write (up to) 275 MB/s
- Random Read (100% Span) 87000 IOPS (4K Blocks)
- Random Write (100% Span) 16000 IOPS (4K Blocks)
- Power - Active 2.2W
- Power - Idle 0.8W
Reliability
- Warranty Period 5 yrs
- Endurance Rating (Lifetime Writes) 0.9 PBW
- Mean Time Between Failures (MTBF) 2 million hours
- Uncorrectable Bit Error Rate (UBER) 1 sector per 10^17 bits read
- Vibration - Operating 2.17 GRMS
- Vibration - Non-Operating 3.13 GRMS
- Shock (Operating and Non-Operating) 1000 G/0.5 msec
- Operating Temperature Range 0°C to 70°C
| SSD form factor | M.2 |
| SSD capacity | 240 GB |
| Interface | Serial ATA III |
| Memory type | TLC 3D NAND |
| NVMe | No |
| Component for | Server/workstation |
| Hardware encryption | Yes |
| Security algorithms | 256-bit AES |
| Read speed | 555 MB/s |
| Write speed | 275 MB/s |
| Random read (100% span) | 87000 IOPS |
| Random write (100% span) | 16000 IOPS |
| Random read | 87000 IOPS |
| Random write | 16000 IOPS |
| Read latency | 34 µs |
| Write latency | 36 µs |
| End-to-End Data Protection | Yes |
| Enhanced Power Loss Data Protection technology | Yes |
| SSD temperature monitoring | Yes |
| Uncorrectable Bit Error Rate (UBER) | < 1 per 10^17 bits read |
| Mean time between failures (MTBF) | 2000000 h |
| SSD ARK ID | 134922 |
| Harmonized System (HS) code | 84717070 |
| Export Control Classification Number (ECCN) | 5A992C |
| Commodity Classification Automated Tracking System (CCATS) | G162706 |
| Temperature monitoring and logging | Yes |
| Power consumption (read) | 2.2 W |
| Power consumption (write) | 2.2 W |
| Power consumption (idle) | 0.8 W |
| Intel High Endurance Technology (HET) | No |
| Intel® Rapid Start Technology | No |
| Intel® Remote Secure Erase | No |
| Intel® Smart Response Technology | No |
| Operating temperature (T-T) | 0 - 70 °C |
| Maximum operating temperature | 70 °C |
| Operating vibration | 2.17 G |
| Non-operating vibration | 3.13 G |
| Operating shock | 1000 G |
| Non-operating shock | 1000 G |
| Operating / non-operating shock | 1000 G/0.5 msec |
| Width | 22 mm |
| Height | 80 mm |
| Endurance rating | 0.85 PB |
| Processor family | Intel SSD D3 |
| Power consumption (active) | 2.2 W |
| Launch date | Q1'19 |
| SSD endurance rating | 0.9 PBW |
| SSD power consumption (idle) | 0.8W |
| SSD shock | 1000 G/0.5 msec |
| Sequential reading | 555 MB/s |
| Sequential writing speed | 275 MB/s |
| Status | Launched |
| Product series | Intel® SSD D3-S4510 Series |
| Product codename | Youngsville Refresh |
Please note that although care has been taken in the degree of relevancy, pictures are for
display purposes only, and product appearance may differ from what you see. If there are any
discrepancies between the product headline, description and picture, the correct information
will be in the product headline (i.e. computer systems may not come with monitors even if
pictured that way). If anything is unclear, please email support before placing your order.