INTEL SSD DC S3610 SERIES 800GB 2.5IN SATA 6GB/S 20NM MLC 7MM OEM PACK NS
Frontpage
Storage
SSD
INTEL SSD DC S3610 SERIES 800GB 2.5IN SATA 6GB/S 20NM MLC 7MM OEM PACK NS
You have to log in to shop/see prices.
|
|
INTEL SSD DC S3610 SERIES 800GB 2.5IN SATA 6GB/S 20NM MLC 7MM OEM PACK NS
-
Read Speed
500MB/s
-
Write Speed
450MB/s
-
Interface
Serial ATA III
-
Form Factor
2.5"
-
SSD Capacity
800GB
|
Description
Specifications
Enhanced Power Loss Data Protection
Enhanced Power Loss Data Protection prepares the SSD for unexpected system power loss by minimizing data in transition in temporary buffers, and uses on-board power-loss protection capacitance to provide enough energy for the SSD firmware to move data from the transfer buffer and other temporary buffers to the NAND, thus protecting system and user data.
High Endurance Technology (HET)
High Endurance Technology (HET) in SSD's combines Intel® NAND Flash Memory silicon enhancements and SSD system management techniques to help extend the endurance of the SSD. Endurance is defined as the amount of data that can be written to an SSD during its lifetime.
Temperature Monitoring and Logging
Temperature Monitoring and Logging uses an internal temperature sensor to monitor and log airflow and device internal temperature. The logged results can be accessed using the SMART command.
End-to-End Data Protection
End-to-End Data Protection ensures integrity of stored data from the computer to the SSD and back.
| SSD form factor | 2.5" |
| SSD capacity | 800 GB |
| Interface | Serial ATA III |
| Memory type | MLC |
| Data transfer rate | 6 Gbit/s |
| Read speed | 500 MB/s |
| Write speed | 450 MB/s |
| Random read (100% span) | 84000 IOPS |
| Random write (100% span) | 28000 IOPS |
| Read latency | 55 µs |
| Write latency | 66 µs |
| Lithography | 20 nm |
| S.M.A.R.T. support | Yes |
| TRIM support | Yes |
| End-to-End Data Protection | Yes |
| Enhanced Power Loss Data Protection technology | Yes |
| SSD temperature monitoring | Yes |
| Uncorrectable Bit Error Rate (UBER) | < 1 per 10^17 bits read |
| Mean time between failures (MTBF) | 2000000 h |
| Market segment | Server |
| SSD usage tag | Data center |
| SSD ARK ID | 82936 |
| Intel High Endurance Technology (HET) | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| Operating vibration | 2.17 G |
| Non-operating vibration | 3.13 G |
| Height | 7 mm |
| Internal | Yes |
| Processor lithography | 20 nm |
| Drive capacity | 800 GB |
| Launch date | Q1'15 |
| Product brief URL | http://www.intel.com/content/www/us/en/solid-state-drives/ssd-dc-s3610-brief.html |
| SSD hardware encryption | AES 256 bit |
| SSD power consumption (active) | 6.0 W |
| SSD power consumption (idle) | 0.6 W |
| SSD shock | 1,000 G/0.5 ms |
| SSD weight | 88 g |
| Sequential reading | 550 MB/s |
| Sequential writing speed | 520 MB/s |
| Status | Discontinued |
| Last change | 63903513 |
| Product family | Data center SSD |
| Product series | Intel DC S3610 |
| Product codename | Haleyville |
Please note that although care has been taken in the degree of relevancy, pictures are for
display purposes only, and product appearance may differ from what you see. If there are any
discrepancies between the product headline, description and picture, the correct information
will be in the product headline (i.e. computer systems may not come with monitors even if
pictured that way). If anything is unclear, please email support before placing your order.