Var god vänta...
Produkten har lagts till i kundvagnen. Se kundvagnen här
040 571 2971 info@hcit.fi
Kundvagnen är tom

INTER-TECH S-3901 Impulse Tower Black

Förstasidan Komponenter Chassi INTER-TECH S-3901 Impulse Tower Black
Hinnat näkyvät vain verkkokauppaan kirjautuneille käyttäjille.
INTER-TECH S-3901 Impulse Tower Black (88881272)

INTER-TECH S-3901 Impulse Tower Black

Artikelnr:
88881272
EAN:
4260455641371
  • Nätaggregat 0W
  • Typ Tower
  • Färg Svart
Beskrivning

S-3901 Impulse


88881272

Are you looking for a special case, that moves your lighting concept into new spheres? Then the S-3901 Impulse is just right for you!
A slightly tinted Tempered Glass side panel and two RGB LED strips, which run over the front panel and the whole top of the case, make the S-3901 the ideal candidate for a high-end system with elaborate LED lighting. This is not only due to the standard 120mm RGB LED fan, that is installed on the rear panel, but also because of the digital 5V RGB control board, which accommodates up to 7 additional RGB fans, which are managed via the RGB motherboard control header. Space for up to four additional 3-pin fans round off the connection variety of the integrated circuit board.
In the top of the case are, in addition to the LED strips, fixed dust filter inserts and the controls. In addition tot wo USB 2.0 and USB 3.0 ports and HD audio jacks, there is a slider to set the fan speed (Off/Low/High) and a switch for manually switching through the LED effects. Another removable dust filter under the power supply and a variety of ways to lay the cables, complete the offer.


Features:

  • Front panel and top with two RGB light strips
  • Side panel made of Tempered Glass
  • 1x 120mm RGB fan at the rear included
  • 3pin RGB header connector for 5V RGB motherboard control
  • LED switch to change colour effects
  • RGB control board for up to 7 additional RGB fans and four 3pin fans
  • Manual fan control via slider in the top
  • Two 3.5" bays below the motherboard carrier with separate airflow
  • Place for water cooling in sizes of 120mm and 240mm
  • Power supply adapter in a separate cage in the bottom part
  • Openings for easy laying of cables
  • Easy removable dust filter below the power supply
  • Slot plates screwed and mesh grid
  • Stands


Specifications:

Size
  • Form factor ATX, mATX, ITX
  • Dimensions (h/w/d) 505 x 215 x 455mm
Installation Dimensions
  • Height CPU cooler (max.) 175mm
  • Length graphics card (max.) 275mm
Drive Bays
  • 5.25" external no
  • 3.5" external no
  • 3.5" internal 2x
  • 2.5" internal 2x
Front connectors
  • USB 3.0 2x
  • USB 2.0 2x
  • Card Reader no
  • Microphone 1x
  • Headphones 1x
Power supply
  • ATX-PSU no
Fan mounting option
  • Front 3x 120mm or 2x 140mm (optional)
  • Rear 1x 120mm (serial, RGB, 6pin connector)
  • Top 2x 120mm or 2x 140mm (optional)
Guarantee / Warranty
  • Warranty 24 months

Även om vi gör vårt bästa för att ge relevant information, så är bilderna bara till för att ge ett generellt intryck, och själva varan behöver nödvändigtvis inte se ut precis som på bilden. Om det är skillnader mellan produktöverskrift, beskrivning och bild, så är det produktöverskriften som gäller. (tex. Pc:n kommer inte nödvändigtvis med monitor även om bilden visar det) Om något är oklart skicka en e-post till oss före du beställer! Vi förbehåller oss för tryckfel, ändringar av priser och specifikationer utan varsel.