SOLIDIGM m D3 Series D3-S4520 - SSD - 1.92 TB - internal - 2.5" - SATA 6Gb/s
Frontpage
Storage
SSD
SOLIDIGM m D3 Series D3-S4520 - SSD - 1.92 TB - internal - 2.5" - SATA 6Gb/s
You have to log in to shop/see prices.
|
|
SOLIDIGM m D3 Series D3-S4520 - SSD - 1.92 TB - internal - 2.5" - SATA 6Gb/s
-
Read Speed
550MB/s
-
Write Speed
510MB/s
-
Interface
Serial ATA III
-
Form Factor
2.5"
-
SSD Capacity
1.92TB
|
D3-S4520 Series (1.92TB, 2.5in SATA 6Gb/s x4, 3D4, TLC) Generic
SSDSC2KB019TZ1Z
Standard-endurance SATA drives with capacities up to 7.68TB, designed to increase server efficiency and boost IOPS/TB performance over legacy hard disk drives (HDDs) for cloud storage.
Specifications:
General
- Capacity 1.92 TB
- Form Factor 2.5" 7mm
- Interface SATA 3.0 6Gb/s
- Weight 60.9 gms
- Lithography Type 144L TLC 3D NAND
- Use Conditions Server/Enterprise
Performance
- Sequential Bandwidth - 100% Read (up to) 550 MB/s
- Sequential Bandwidth - 100% Write (up to) 510 MB/s
- Random Read (100% Span) 91000 IOPS
- Random Write (100% Span) 38000 IOPS
- Power - Active 3.1W
- Power - Idle 1.1W
- Latency - Random Read (typ.) 104µs
- Latency - Random Write (typ.) 54µs
- Latency - Sequential Read (typ.) 37µs
- Latency - Sequential Write (typ.) 38µs
Reliability
- Warranty Period 5 yrs
- Endurance Rating (Lifetime Writes) Up to 2.5 DWPD / Up to 8.8 PBW
- Mean Time Between Failures (MTBF) 2 million hours
- Uncorrectable Bit Error Rate (UBER) < 1 sector per 10^17 bits read
- Vibration - Operating 2.17 GRMS (5 - 700 Hz) Max
- Vibration - Non-Operating 3.13 GRMS (5 - 800 Hz) Max
- Shock (Operating and Non-Operating) 1,000 G (Max) at 0.5 msec
- Operating Temperature Range 0°C to 70°C
Please note that although care has been taken in the degree of relevancy, pictures are for
display purposes only, and product appearance may differ from what you see. If there are any
discrepancies between the product headline, description and picture, the correct information
will be in the product headline (i.e. computer systems may not come with monitors even if
pictured that way). If anything is unclear, please email support before placing your order.