ALTA LABS Route10, Four 2.5 Gbps RJ45 Ports, 2 with PoE+, Two 10 Gbps SFP+ Ports

The Alta Labs logo LED on top of the device flashes as the unit is powered up. Once fully booted, the LED will remain lit unless turned off in the UI. The LED color can also be changed in the management interface.The bottom of the device has padding fordesktop placement and notches for mounting.Reset Button Press down for 10 seconds until the LED begins flashing to reset the router to factory defaults.Ports 1-4 are standard Gigabit Ethernet ports that support 10/100/1000/2500 Mbps connections.The Link LED on the left indicates a 10/100 Mbps connection when amber and blue indicates a 1 Gbps connection. For 2.5 Gbps connections, the LED on the right will illuminate white. If neither port LED is illuminated, then the connection is down.Ports 2 and 3 support 802.3at PoE+ with up to 30W per port and a PoE budget of 40 Watts.The PoE LEDs are located below ports 2 & 3 with the icon next to them. They will illuminate amber when a device connected to the port is being powered via Ethernet.The SFP+ Ports support fiber optic and Ethernet transceivers with 1 Gbps, 2.5 Gbps, 5 Gbps, or 10 Gbps connections.The Link LED on the left will illuminate blue when there is a 1 Gbps, 2.5 Gbps, or 5 Gbps connection, it will illuminate white with a 10 Gbps connection.The Activity LED on the right flashes blue when there is activity on a 1 Gbps, 2.5 Gbps, or 5 Gbps connection. It will flash white if there is 10 Gbps network activity.