FIBARO Temperature/Humidity Sensor
Hinnat näkyvät vain verkkokauppaan kirjautuneille käyttäjille.
|
|
FIBARO Temperature/Humidity Sensor
|
Fibaro Flood Sensor is a universal, Z-Wave compatible, flood and temperature sensor. Device can be battery (ca. 2 years battery life) or VDC powered (12 or 24 VDC). Flood alarm is sent to the Z-Wave network devices or additionally to any alarm system controller, through opening a NC contact. The device has built in temperature sensor, monitoring temperature of e.g. floor. Fibaro Flood Sensor is designed to be placed on the floor or on a wall with a flood sensor probe extended by connected wire. The device has built in LED indicator and acoustic alarm. In addition, the sensor is equipped with a tilt sensor reporting tilt or movement to the main controller e.g. when someone has taken the Sensor from its original location. LED diode signals flood, operating mode or the Z-Wave network communication range. Fibaro Flood Sensor is sink-proof, which means it drifts on the water surface and keeps on sending alarm signal in case of substantial inundation of water.
| Tarkoitus | Sisä- ja ulkotila |
| Malli | Vapaasti seisova |
| Yhteysteknologia | Langaton |
| Kosteuden mittausalue | 0 - 40% |
| Tarkkuus | 0,5 °C |
| Toimintasäde | 50 m |
| Akkutyyppi | CR123A |
| Tuettu paristojen lukumäärä | 1 |
| Tuotteen leveys | 72 mm |
| Tuotteen syvyys | 72 mm |
| Tuotteen korkeus | 28 mm |
| Sisäänrakennettu näyttö | Ei |
Huomioi, että kuva on suuntaa-antava ja varsinainen tuote saattaa ulkoasultaan poiketa tuotekuvasta (esim. tietokoneisiin ei välttämättä sisälly näyttöä, vaikka kuvassa sellainen olisikin). Jos tuotenimikkeessä on eri tiedot kuin tuotekuvauksessa, tuotenimikkeen tieto on oikein. Jos jokin asia jää epäselväksi, lähetä sähköpostia tukeen ennen tuotteen tilaamista.