Line Interactive FP 600 Excellent microprocessor control guarantees high reliability Boost and buck AVR for voltage stabilization Auto restart while AC is recovering Compact Size Simulated sine wave Off-mode charging Cold start function Generator compatible Specifications Model FP 600 Capacity 600 VA / 360 W Available Factory Settings 110 / 120 VAC or 220 / 230 / 240 VAC Input Voltage 162-290 VAC Input Frequence 60/50 Hz (auto sensing) Output Voltage 220V nominal Output / Frequence Range 60 Hz or 50 Hz ±1 Hz Output / Transfer Time (Typical) Typical 2-6 ms Output / Waveform (Batt. Mode) Simulated Sine Wave Battery / Battery Type & Number 12V / 7 Ah x 1 Battery / Backup Time (One PC load@120W) 10 min. Battery / Typical Recharge Time 4-6 hours recover to 90% capacity Indicators / Ac Mode Green lighting Indicators / Battery Mode Green flashing Indicators / Fault N / A Protection / Full Protection Overload, discharge and overcharge protection Alarm / Battery Mode Sounding every 10 seconds Alarm / Low Battery Sounding every second Alarm / Overload Sounding every 0.5 second Alarm / Battery Replacement Alarm Sounding every 2 seconds Alarm / Fault Continuously sounding Outlet sockets 2 x schuko Physical Dimension, D x W x H (mm) 279 x 101 x 142 Physical Net Weight (kg) 4.25 Operating Environment / Humidity 0-90% RH @ 0-40°C (non-condensing) Operating Environment / Noise Level Less than 40dB Management / Optional USB / RS-232 Port Supports Windows® 98/2000/2003/XP/Vista/2008, Windows® 7, Linux, and MAC