LIAN-LI Lancool Ii Mesh Rgb Midi
Hinnat näkyvät vain verkkokauppaan kirjautuneille käyttäjille.
|
|
LIAN-LI Lancool Ii Mesh Rgb Midi
Tuotekoodi:
Lancool II mesh C RGB snow
-
Tyyppi
Midi torni
-
Virtalähde
0W
-
Väri
Valkoinen
|
LANCOOL II Mesh C RGB White
Features:
- THE ULTIMATE CHASSIS FOR BEGINNERS AND ENTHUSIASTS ALIKE
- Premium look
- Unprecedented modularity
- Hinged flip panels all around
- Optimized cooling support
- Cable management with ease
- Optimized storage configuration
- EXQUISITE STEEL CRAFTSMANSHIP
- Mesh intakes spanning the front panel guarantee sufficient airflow in and out of the system, allowing it to run at peak performance.
- MORE ADVANCED COOLING SUPPORT
- Optimized airflow is a result of the collaboration between the brand-new mesh design, additional exhaust vent holes, and three high-performance PWM cooling fans.
- HIGH-PERFORMANCE BUILT-IN PWM FANS
- 3 x 120mm ARGB intake fans pre-installed at the front produce ample airflow while still offering bountiful RGB to liven up your PC build.
- EXPERIENCE ARGB CONTROL ON A WHOLE NEW LEVEL
- Lighting effects of the 3 included ARGB fans can be fully controlled through the C button and M button located on the top front. Switching between 8 lighting modes has never been this easy.
- MODULAR PSU SHROUD COVER
- The space between the top and bottom chamber now features two removable PSU shroud covers to house either 2 x 2.5” SSDs or can be removed to fit 2 x 120mm fans.
- MULTI-WAY FAN/RADIATOR BRACKET
- The multi-way bracket revolutionizes your notion of fan/radiator installation by offering 4 installation options to best fit your needs.
- OPTIMIZED STORAGE CONFIGURATION
- With the modular drive cage, side-mounted SSD bays, and additional SSD space on the modular PSU shroud cover, the LANCOOL II MESH is capable of holding up to 9 drives.
Specifications:
Dimensions - (D) 478mm x (W) 229mm x (H) 494mm
Motherboard - E-ATX(width: under 280mm)/ATX/M-ATX/ITX
PSU
Color
Materials
- Steel
- 4.0mm tempered glass (both sides)
Fan Support - Front (multi-way fan/radiator bracket): 3 x 120mm or 2 x 140mm
- Top: 2 x 120/140mm
- Rear: 1 x 120mm
- Above PSU Chamber: 2 x 120mm
Radiator - Front (multi-way fan/radiator bracket): 1 x 360/280/240mm
- Top: 1 x 240mm (aligned to the left)
VGA Length
CPU Clearance
Drive
- Behind MB Tray: 2 x 2.5″ SSD
- Behind the right flip panel: 2 x 2.5”SSD
- Hard Drive Cage: 3 x 3.5″ HDD/2.5″ SSD
- Above PSU Chamber: 2 x 2.5″ SSD
Slot
I/O Ports
- C button for color control
- M button for lighting mode control
- 1 x TRRS AUDIO
- 2 x USB 3.0
- 1 x USB 3.1 TYPEC
Dust Filters - 1 x Top (magnetic), 1 x Bottom (tray)
Incl Fans - 3 x included 120mm 3-PIN 1300 RPM ARGB fans
- Rated Speed:1300RPM ±10 %
- Air Flow:49.14CFM
- Noise:25.0dB(A)
Huomioi, että kuva on suuntaa-antava ja varsinainen tuote saattaa ulkoasultaan poiketa tuotekuvasta (esim. tietokoneisiin ei välttämättä sisälly näyttöä, vaikka kuvassa sellainen olisikin). Jos tuotenimikkeessä on eri tiedot kuin tuotekuvauksessa, tuotenimikkeen tieto on oikein. Jos jokin asia jää epäselväksi, lähetä sähköpostia tukeen ennen tuotteen tilaamista.