Ole hyvä ja odota...
Tuote on lisätty ostoskoriin. Näytä ostoskorin sisältö
040 571 2971 info@hcit.fi
Ostoskorisi on tyhjä

NOCTUA Computer Cooling System

Etusivu Komponentit Jäähdytys NOCTUA Computer Cooling System
Hinnat näkyvät vain verkkokauppaan kirjautuneille käyttäjille.
NOCTUA Computer Cooling System  (NF-A14X25R G2 PWM SX2 PP)

NOCTUA Computer Cooling System

Tuotekoodi:
NF-A14X25R G2 PWM SX2 PP
  • Käytetty alue PC:n tuuletin
  • Fan diameter 14cm
Kuvaus

NF-A14x25r G2 PWM Sx2-PP

The NF-A14x25r G2 PWM Sx2-PP is a set of two NF-A14x25r G2 PWM round-frame 140mm fans for push-pull operation on heatsinks such as the NH-D15(S) or NH-U14S. When two fans operate in a push-pull configuration running at almost the same, constant speed, their acoustic interaction can lead to undesirable harmonic phenomena such as intermittent vibrations or periodic humming due to interference, which can be heard as beat frequencies. Therefore, the two NF-A14x25r G2 PWM fans contained in the Sx2-PP set are slightly offset in speed (+/- ~25rpm) in order to avoid such phenomena. This fine-tuning is made possible by the fans’ novel etaPERF™ motor and its NE-FD6 driver IC that achieves extremely precise speed control and, thanks to its SupraTorque™ feature, can leverages extra torque headroom to keep the exact desired speed even when working against significant flow resistance such as on heatsinks. With one fan running ~25rpm slower (PPA) and one ~25rpm faster (PPB), the overall cooling performance can be kept the same while efficiently preventing intermittent vibrations or periodic humming. Since the perception of beat frequencies can vary depending on psychoacoustic preferences, users can easily further optimise acoustics by slowing the PPA fan down a little more through PWM control or the supplied Low-Noise-Adaptor, which will result in an even smoother sound signature due to the increased offset.

Specifications:

Size
  • 140x140x25 mm
Mounting hole spacing
  • 105x105 mm
Connector & pin-configuration
  • 4-pin PWM
Cable length
  • 20cm + 30cm NA-EC1 extension cable
Bearing
  • SSO2
Blade geometry
  • Progressive-Bend impeller
Frame technology
  • AAO (Advanced Acoustic Optimisation)
Material
  • Sterrox® LCP
Rotational speed (+/- 10%)
  • 1500 RPM
Rotational speed with L.N.A. (+/- 10%)
  • 1250 RPM
Airflow
  • 155.6 m³/h
Airflow with L.N.A.
  • 127.1 m³/h
Acoustical noise
  • 24.8 dB(A)
Acoustical noise with L.N.A.
  • 19.7 dB(A)
Static pressure
  • 2.56 mm H₂O
Static pressure with L.N.A.
  • 1.3 mm H₂O
Input power (max.)
  • 2.28 W
Max. input current
  • 0.19 A
Operating voltage
  • 12 V
Voltage PWM signal
  • 5 V
MTTF
  • > 150,000 h
Scope of delivery
  • NF-A14x25r G2 PWM PPA
  • NF-A14x25r G2 PWM PPB
  • 2x NA-RC16 Low-Noise Adaptor (L.N.A.)
  • NA-YC1 4-pin PWM splitter cable
  • 2x NA-EC1 30cm extension cable
  • 8x NA-AV2 anti-vibration mounts
  • Fan screws
Warranty
  • 6 years

Huomioi, että kuva on suuntaa-antava ja varsinainen tuote saattaa ulkoasultaan poiketa tuotekuvasta (esim. tietokoneisiin ei välttämättä sisälly näyttöä, vaikka kuvassa sellainen olisikin). Jos tuotenimikkeessä on eri tiedot kuin tuotekuvauksessa, tuotenimikkeen tieto on oikein. Jos jokin asia jää epäselväksi, lähetä sähköpostia tukeen ennen tuotteen tilaamista.