SOLIDIGM SSD D3-S4520 Series 240GB M.2 80 SATA SP
Hinnat näkyvät vain verkkokauppaan kirjautuneille käyttäjille.
|
|
SOLIDIGM SSD D3-S4520 Series 240GB M.2 80 SATA SP
Tuotekoodi:
SSDSCKKB240GZ1Z
-
Lukunopeus
400MB/s
-
Kirjoitusnopeus
233MB/s
-
Liitäntä
Serial ATA III
-
Form Factor
M.2
-
Kapasiteetti
240GB
|
D3-S4520 Series (240GB, M.2 80mm SATA 6Gb/s x4, 3D4, TLC)
SSDSCKKB240GZ1Z
Standard-endurance SATA drives with capacities up to 7.68TB, designed to increase server efficiency and boost IOPS/TB performance over legacy hard disk drives (HDDs) for cloud storage.
Specifications:
General
- Capacity 240 GB
- Form Factor M.2 80mm
- Interface SATA 3.0 6Gb/s
- Weight 7.3 gms
- Lithography Type 144L TLC 3D NAND
- Use Conditions Server/Enterprise
Performance
- Sequential Bandwidth - 100% Read (up to) 400 MB/s
- Sequential Bandwidth - 100% Write (up to) 233 MB/s
- Random Read (100% Span) 42000 IOPS
- Random Write (100% Span) 14500 IOPS
- Power - Active 2.1W
- Power - Idle 0.9W
- Latency - Random Read (typ.) 102µs
- Latency - Random Write (typ.) 63µs
- Latency - Sequential Read (typ.) 36µs
- Latency - Sequential Write (typ.) 36µs
Reliability
- Warranty Period 5 yrs
- Endurance Rating (Lifetime Writes) Up to 2.4 DWPD / Up to 1.0 PBW
- Mean Time Between Failures (MTBF) 2 million hours
- Uncorrectable Bit Error Rate (UBER) < 1 sector per 10^17 bits read
- Vibration - Operating 2.17 GRMS (5 - 700 Hz) Max
- Vibration - Non-Operating 3.13 GRMS (5 - 800 Hz) Max
- Shock (Operating and Non-Operating) 1,000 G (Max) at 0.5 msec
- Operating Temperature Range 0°C to 70°C
Huomioi, että kuva on suuntaa-antava ja varsinainen tuote saattaa ulkoasultaan poiketa tuotekuvasta (esim. tietokoneisiin ei välttämättä sisälly näyttöä, vaikka kuvassa sellainen olisikin). Jos tuotenimikkeessä on eri tiedot kuin tuotekuvauksessa, tuotenimikkeen tieto on oikein. Jos jokin asia jää epäselväksi, lähetä sähköpostia tukeen ennen tuotteen tilaamista.