SOLIDIGM SSD S4520 480GB M.2 80mm SATA
Hinnat näkyvät vain verkkokauppaan kirjautuneille käyttäjille.
|
|
SOLIDIGM SSD S4520 480GB M.2 80mm SATA
Tuotekoodi:
SSDSCKKB480GZ01
-
Lukunopeus
550MB/s
-
Kirjoitusnopeus
500MB/s
-
Liitäntä
Serial ATA III
-
Form Factor
M.2
-
Kapasiteetti
480GB
|
D3-S4520 Series (480GB, M.2 80mm SATA 6Gb/s, 3D4, TLC)
SSDSCKKB480GZ01
Standard-endurance SATA drives with capacities up to 7.68TB, designed to increase server efficiency and boost IOPS/TB performance over legacy hard disk drives (HDDs) for cloud storage.
Specifications:
General
- Capacity 480 GB
- Form Factor M.2 80mm
- Interface SATA 3.0 6Gb/s
- Weight 7.8 gms
- Lithography Type 144L TLC 3D NAND
- Use Conditions Server/Enterprise
Performance
- Sequential Bandwidth - 100% Read (up to) 550 MB/s
- Sequential Bandwidth - 100% Write (up to) 500 MB/s
- Random Read (100% Span) 85000 IOPS
- Random Write (100% Span) 48000 IOPS
- Power - Active 3W
- Power - Idle 0.9W
- Latency - Random Read (typ.) 102µs
- Latency - Random Write (typ.) 43µs
- Latency - Sequential Read (typ.) 36µs
- Latency - Sequential Write (typ.) 36µs
Reliability
- Warranty Period 5 yrs
- Endurance Rating (Lifetime Writes) Up to 4.7 DWPD / Up to 4.1 PBW
- Mean Time Between Failures (MTBF) 2 million hours
- Uncorrectable Bit Error Rate (UBER) < 1 sector per 10^17 bits read
- Vibration - Operating 2.17 GRMS (5 - 700 Hz) Max
- Vibration - Non-Operating 3.13 GRMS (5 - 800 Hz) Max
- Shock (Operating and Non-Operating) 1,000 G (Max) at 0.5 msec
- Operating Temperature Range 0°C to 70°C
Huomioi, että kuva on suuntaa-antava ja varsinainen tuote saattaa ulkoasultaan poiketa tuotekuvasta (esim. tietokoneisiin ei välttämättä sisälly näyttöä, vaikka kuvassa sellainen olisikin). Jos tuotenimikkeessä on eri tiedot kuin tuotekuvauksessa, tuotenimikkeen tieto on oikein. Jos jokin asia jää epäselväksi, lähetä sähköpostia tukeen ennen tuotteen tilaamista.